Quick Detail

Globe valve, also known as the cut-off valve, is a forced-sealed valve, so the valve is closed, the pressure must be applied to the valve flap to force the sealing surface does not leak. When the medium from below the valve into the valve, the operating force needed to overcome the resistance is the valve stem and packing friction and the thrust generated by the media pressure, off the valve force than the valve open, so the valve stem The diameter should be larger, otherwise it will happen valve stem bend. According to the connection is divided into three kinds: flange connection, threaded connection, welding connection. From the self-sealing valve appears, the cut-off valve to change the flow of medium from the top of the valve into the valve chamber, then under medium pressure, the valve closed the force is small, and open the valve force, the stem diameter can be To reduce. At the same time, in the medium, this form of valve is also more stringent. China's valve "three to" have provided that the flow of the valve, all from top to bottom. When the globe valve is opened, the flap opening height is 25% ~ 30% of the nominal diameter, the flow rate has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the full-stop position of the valve, valve stroke should be determined.Stop valve (Globe Valve) is the opening and closing pieces of the plug-shaped flap, sealing surface is flat or sea cone, the valve flap along the center line of linear motion. Stem movement (common name: dark bar), but also lift the lever can be used to control the air, water, steam, all kinds of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow. Therefore, this type of shut-off valve is well-suited for shut-off or regulation and throttling purposes. Due to the valve stem of this type of valve opening or closing stroke is relatively short, but also has a very reliable cut-off function, but also because the valve seat opening changes in proportion with the valve stroke is proportional to the flow rate is very suitable for regulation.

Specification:

material: bronze

Nominal diameter: According to the size provided by the customer

Connection: RF,BW,SW,THR

Nominal Pressure:According to the size provided by the customer

Working temperature: Depending on the material